PROGRAMMERS
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
The MPLAB® Snap In-Circuit Debugger/Programmer allows affordable, fast and easy debugging and programming of most PIC®, dsPIC® and AVR flash MCUs, using the powerful graphical user interface of MPLAB X Integrated Development Environment (IDE) version 5.05 or later. The MPLAB Snap can be connected to a computer using a High-Speed USB 2.0 interface and can be connected to the target via an 8-pin Single In-Line (SIL) connector. The connector uses two device I/O pins and the reset line to implement in-circuit debugging and In-Circuit Serial Programming™ (ICSP™). It has all the speed and features entry-level users need to quickly debug their prototype.
The MPLAB Snap programs fast, with a powerful 32-bit 300MHz SAME70 MCU for quicker debug iterations. Along with a wide target voltage, the MPLAB Snap supports advanced interfaces such as 4-wire JTAG and Serial Wire Debug with streaming data gateway, while being backward compatible for demo boards, headers and target systems using 2-wire JTAG and ICSP.
The MPLAB® Snap In-Circuit Debugger/Programmer allows affordable, fast and easy debugging and programming of most PIC®, dsPIC® and AVR flash MCUs, using the powerful graphical user interface of MPLAB X Integrated Development Environment (IDE) version 5.05 or later. The MPLAB Snap can be connected to a computer using a High-Speed USB 2.0 interface and can be connected to the target via an 8-pin Single In-Line (SIL) connector. The connector uses two device I/O pins and the reset line to implement in-circuit debugging and In-Circuit Serial Programming™ (ICSP™). It has all the speed and features entry-level users need to quickly debug their prototype.
The MPLAB Snap programs fast, with a powerful 32-bit 300MHz SAME70 MCU for quicker debug iterations. Along with a wide target voltage, the MPLAB Snap supports advanced interfaces such as 4-wire JTAG and Serial Wire Debug with streaming data gateway, while being backward compatible for demo boards, headers and target systems using 2-wire JTAG and ICSP.
Standard Pricing
Quantity
EUR per Unit
The Tag-Connect Clip Board (TC2030-CLIP-3PACK) attaches to the alignment pins of a Tag-Connect No Legs cable such as TC2030-MCP-NL. The Clip Board can be pressed onto the alignment pins from underneath the circuit board, providing a temporary connection for debugging purposes. Then you have the best of both worlds: a small PCB footprint and a reliable debugging connection. Note: Clip Boards are small and easily misplaced, so we include 3 in the package.
Tag-Connect is a trusted third-party tool provider
The Tag-Connect Clip Board (TC2030-CLIP-3PACK) attaches to the alignment pins of a Tag-Connect No Legs cable such as TC2030-MCP-NL. The Clip Board can be pressed onto the alignment pins from underneath the circuit board, providing a temporary connection for debugging purposes. Then you have the best of both worlds: a small PCB footprint and a reliable debugging connection. Note: Clip Boards are small and easily misplaced, so we include 3 in the package.
Tag-Connect is a trusted third-party tool provider
Standard Pricing
Quantity
EUR per Unit
All signals are limited to 3.3V. The LProg cannot apply higher voltages that are required for other PIC MCUs, as those voltages damage 3.3V devices. The programming lines are available via labeled pads. An extra ground pad is provided for ease of making cables that prevent crosstalk and allow for long (several meters) programming cables.
- Small size (2.3 x 1 x 0.6 inches)
- Scriptable run-time software available
- Host library available; create applications to read/write/verify device memory using the supplied API
- Documentation and free software available from the vendor
- Not currently supported in MPLAB X IDE
- USB and programming cables NOT included
All signals are limited to 3.3V. The LProg cannot apply higher voltages that are required for other PIC MCUs, as those voltages damage 3.3V devices. The programming lines are available via labeled pads. An extra ground pad is provided for ease of making cables that prevent crosstalk and allow for long (several meters) programming cables.
- Small size (2.3 x 1 x 0.6 inches)
- Scriptable run-time software available
- Host library available; create applications to read/write/verify device memory using the supplied API
- Documentation and free software available from the vendor
- Not currently supported in MPLAB X IDE
- USB and programming cables NOT included
The chipKIT PGM is designed to work with the MPLAB® v8 and MPLAB® X IDE. This allows the chipKIT boards, for example, to be used as a more traditional microcontroller development platform.
- Supports Microchip`s 3.3V devices only
- Intended for use with the chipKIT Max32™, Uno32™, uC32™, and the Cerebot MX3cK
- Includes USB A-Mini B cable and a right-angle 6 pin header
Digilent is a trusted third-party tool provider.
The chipKIT PGM is designed to work with the MPLAB® v8 and MPLAB® X IDE. This allows the chipKIT boards, for example, to be used as a more traditional microcontroller development platform.
- Supports Microchip`s 3.3V devices only
- Intended for use with the chipKIT Max32™, Uno32™, uC32™, and the Cerebot MX3cK
- Includes USB A-Mini B cable and a right-angle 6 pin header
Digilent is a trusted third-party tool provider.
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
The Debugger Adapter Board is a connectivity board that gives MPLAB ICD 4 and MPLAB PICkit 4 Debuggers cable compatibility to demo boards with Atmel-ICE, Power Debugger and Segger J-Link style connectors. It supports JTAG, SWD and ICSP protocols in multiple connector formats. It is useful for debugging legacy AVR Xplained demonstration boards with MPLAB PICkit 4 debuggers.
Note: Use AC164100 (RJ-11 to ICSP Adapter) to convert between RJ11 (MPLAB ICD 4) to 1 x 6 100 mil SIP ICSP (MPLAB PICkit 4) connectors
The Debugger Adapter Board is a connectivity board that gives MPLAB ICD 4 and MPLAB PICkit 4 Debuggers cable compatibility to demo boards with Atmel-ICE, Power Debugger and Segger J-Link style connectors. It supports JTAG, SWD and ICSP protocols in multiple connector formats. It is useful for debugging legacy AVR Xplained demonstration boards with MPLAB PICkit 4 debuggers.
Note: Use AC164100 (RJ-11 to ICSP Adapter) to convert between RJ11 (MPLAB ICD 4) to 1 x 6 100 mil SIP ICSP (MPLAB PICkit 4) connectors
Tag-Connect In-Circuit Programming and Debug Cable (TC2030-MCP) is compatible with MPLAB REAL ICE, MPLAB ICD 3 and MPLAB ICD 2. This cable uses high-reliability spring pins which connect to a tiny footprint of pads and locating holes on your PCB. It has plastic legs that snap directly into the board to hold it securely in place saving both board space and the cost of a mating header component on every PCB.
Tag-Connect is a trusted third-party tool provider
Tag-Connect In-Circuit Programming and Debug Cable (TC2030-MCP) is compatible with MPLAB REAL ICE, MPLAB ICD 3 and MPLAB ICD 2. This cable uses high-reliability spring pins which connect to a tiny footprint of pads and locating holes on your PCB. It has plastic legs that snap directly into the board to hold it securely in place saving both board space and the cost of a mating header component on every PCB.
Tag-Connect is a trusted third-party tool provider
Standard Pricing
Quantity
EUR per Unit
Tag-Connect In-Circuit Programming Cable (TC2030-MCP-NL) is compatible with MPLAB REAL ICE, MPLAB ICD 3 and MPLAB ICD 2. This cable uses high-reliability spring pins which connect to a tiny footprint of pads and locating holes on your PCB. It has three steel pins that ensure accurate alignment and correct orientation and is hand-held during a fast programming operation. TC2030-MCP-NL is particularly suitable for production programming operations and applications where board space is a premium.
Tag-Connect is a trusted third-party tool provider.
Tag-Connect In-Circuit Programming Cable (TC2030-MCP-NL) is compatible with MPLAB REAL ICE, MPLAB ICD 3 and MPLAB ICD 2. This cable uses high-reliability spring pins which connect to a tiny footprint of pads and locating holes on your PCB. It has three steel pins that ensure accurate alignment and correct orientation and is hand-held during a fast programming operation. TC2030-MCP-NL is particularly suitable for production programming operations and applications where board space is a premium.
Tag-Connect is a trusted third-party tool provider.
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Mature Product
The PICkit 3 is not recommended for new designs. For new designs, please see the MPLAB PICKit 4.
The PICkit 3 allows debugging and programming of PIC(R) and dsPIC(R) Flash microcontrollers using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). Please note: a RJ-11 to ICSP adaptor (AC164 110) is required when using the PICkit 3 with MPLAB ICD Headers.
Note: The PICkit 3 is for development purposes only. For production programming, see the ICD 3, Part Number DV164035.
The PICkit 3 is not recommended for new designs. For new designs, please see the MPLAB PICKit 4.
The PICkit 3 allows debugging and programming of PIC(R) and dsPIC(R) Flash microcontrollers using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). Please note: a RJ-11 to ICSP adaptor (AC164 110) is required when using the PICkit 3 with MPLAB ICD Headers.
Note: The PICkit 3 is for development purposes only. For production programming, see the ICD 3, Part Number DV164035.
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Note: This is a special-order cable for use with the Synopsys Metaware IDE debugger and MCHP Serial Flash Programming Utility for CPG products.
Digilent is a trusted third-party tool provider.
Note: This is a special-order cable for use with the Synopsys Metaware IDE debugger and MCHP Serial Flash Programming Utility for CPG products.
Digilent is a trusted third-party tool provider.
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
This Kit includes 2 Tag-Connect cables Legged and No Legs, a sample PCB to demonstrate footprint for each type of cable, and a Tag-Connect Clip Board for debugging with a No-Legs cable. The cables use high-reliability spring pins that connect to a tiny footprint of pads and locating holes on your PCB. The Legged version has plastic legs that snap directly into the board to hold it securely in place. The No-Legs version has three steel pins that ensure accurate alignment and correct orientation and is hand-held during a fast programming operation. Tag-Connect cables save the board space and expense of a mating header component on every PCB.
- Compatible with MPLAB REAL ICE, MPLAB ICD 2, and MPLAB ICD 3
- Legged cable available separately: TC2030-MCP
- No Legs cable available separately: TC2030-MCP-NL
- Clip Board is available separately: TC2030-CLIP-3PACK
Tag-Connect is a trusted third-party tool provider.
This Kit includes 2 Tag-Connect cables Legged and No Legs, a sample PCB to demonstrate footprint for each type of cable, and a Tag-Connect Clip Board for debugging with a No-Legs cable. The cables use high-reliability spring pins that connect to a tiny footprint of pads and locating holes on your PCB. The Legged version has plastic legs that snap directly into the board to hold it securely in place. The No-Legs version has three steel pins that ensure accurate alignment and correct orientation and is hand-held during a fast programming operation. Tag-Connect cables save the board space and expense of a mating header component on every PCB.
- Compatible with MPLAB REAL ICE, MPLAB ICD 2, and MPLAB ICD 3
- Legged cable available separately: TC2030-MCP
- No Legs cable available separately: TC2030-MCP-NL
- Clip Board is available separately: TC2030-CLIP-3PACK
Tag-Connect is a trusted third-party tool provider.
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Atmel-ICE is a powerful development tool for debugging and programming ARM® Cortex®-M based SAM and AVR microcontrollers with on-chip debug capability.
Atmel-ICE is a powerful development tool for debugging and programming ARM® Cortex®-M based SAM and AVR microcontrollers with on-chip debug capability.
Standard Pricing
Quantity
EUR per Unit
Includes socket cards in 2 different sizes:
3.2 x 2.5 mm
2.0 x 1.6 mm
Includes socket cards in 2 different sizes:
3.2 x 2.5 mm
2.0 x 1.6 mm
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
This socket module supports 16/28P SOIC PIC or dsPIC devices on the MPLAB PM3 Programmer. There are two sockets on this module:
- In one you can fit 150mils packages, up-to 14 pins
- In the second one you can fit 300-mils packages, up-to 28-pins
This socket module supports 16/28P SOIC PIC or dsPIC devices on the MPLAB PM3 Programmer. There are two sockets on this module:
- In one you can fit 150mils packages, up-to 14 pins
- In the second one you can fit 300-mils packages, up-to 28-pins
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
In addition the Power Debugger has two independent current sensing channels for measuring and optimizing the power consumption of a design.
Power Debugger also includes a CDC virtual COM port interface as well as Data Gateway Interface channels for streaming application data to the host computer from a SPI, USART, TWI or GPIO source.
The Power Debugger is a CMSIS-DAP compatible debugger which works with Studio 7.0 or later, or other frontend software capable of connecting to a generic CMSIS-DAP unit. The Power Debugger streams power measurements and application debug data to Data Vizualiser for real-time analysis.
In addition the Power Debugger has two independent current sensing channels for measuring and optimizing the power consumption of a design.
Power Debugger also includes a CDC virtual COM port interface as well as Data Gateway Interface channels for streaming application data to the host computer from a SPI, USART, TWI or GPIO source.
The Power Debugger is a CMSIS-DAP compatible debugger which works with Studio 7.0 or later, or other frontend software capable of connecting to a generic CMSIS-DAP unit. The Power Debugger streams power measurements and application debug data to Data Vizualiser for real-time analysis.
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Load-n-Go (CCS 53503-814) is a low-cost handheld in-circuit programmer that supports PIC10, PIC12, PIC14, PIC16, PIC18, PIC24 and dsPIC families. Running on four AA batteries this mobile programmer can go where no PC or laptop could go before. The simple user interface seamlessly allows for quick field programming of targets with up to four firmware images. Load-n-Go can also be powered via USB or with a 9V AC adapter and used as a regular ICD/ICSP with the CCS IDE compilers.
CCS is a trusted Third-Party Tool Provider More Info
Load-n-Go (CCS 53503-814) is a low-cost handheld in-circuit programmer that supports PIC10, PIC12, PIC14, PIC16, PIC18, PIC24 and dsPIC families. Running on four AA batteries this mobile programmer can go where no PC or laptop could go before. The simple user interface seamlessly allows for quick field programming of targets with up to four firmware images. Load-n-Go can also be powered via USB or with a 9V AC adapter and used as a regular ICD/ICSP with the CCS IDE compilers.
CCS is a trusted Third-Party Tool Provider More Info
Standard Pricing
Quantity
EUR per Unit
Mature Product
The MPLAB ICD 3 is a mature product. For new designs, consider using the MPLAB ICD 4 (DV164045)
MPLAB ICD 3 In-Circuit Debugger System is Microchips latest and most cost-effective high-speed emulator for Microchip Flash Digial Signal Controller (DSC) and microcontroller (MCU) devices. It debugs and programs PIC(R) Flash microcontrollers and dsPIC(R) DSCs with the powerful, yet easy-to-use graphical user interface of MPLAB Integraded Development Environment (IDE). MPLAB ICD 3 In-Circuit Debugger provides significant performance enhancements for embedded systems designers. Programming times are typically 15x faster than previous systems. A 40MHz dsPIC33 and high-speed FPGA yield faster communications, downloads and debugging. For further technical descriptions, refer to www.microchip.com/icd3.
The MPLAB ICD 3 is a mature product. For new designs, consider using the MPLAB ICD 4 (DV164045)
MPLAB ICD 3 In-Circuit Debugger System is Microchips latest and most cost-effective high-speed emulator for Microchip Flash Digial Signal Controller (DSC) and microcontroller (MCU) devices. It debugs and programs PIC(R) Flash microcontrollers and dsPIC(R) DSCs with the powerful, yet easy-to-use graphical user interface of MPLAB Integraded Development Environment (IDE). MPLAB ICD 3 In-Circuit Debugger provides significant performance enhancements for embedded systems designers. Programming times are typically 15x faster than previous systems. A 40MHz dsPIC33 and high-speed FPGA yield faster communications, downloads and debugging. For further technical descriptions, refer to www.microchip.com/icd3.
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
The MPLAB ICD 4 In-Circuit Debugger/Programmer supports many, but not all, PIC MCUs and dsPIC DSCs at this time. To request priority device support or to report issues, email: ICD4_update@microchip.com
The MPLAB ICD 4 In-Circuit Debugger/Programmer supports many, but not all, PIC MCUs and dsPIC DSCs at this time. To request priority device support or to report issues, email: ICD4_update@microchip.com
Standard Pricing
Quantity
EUR per Unit
Includes socket cards in 6 different sizes:
7.0 x 5.0 mm
5.0 x 3.2 mm
3.2 x 2.5 mm
2.5 x 2.0 mm
2.0 x 1.6 mm
1.6 x 1.2 mm
Includes socket cards in 6 different sizes:
7.0 x 5.0 mm
5.0 x 3.2 mm
3.2 x 2.5 mm
2.5 x 2.0 mm
2.0 x 1.6 mm
1.6 x 1.2 mm
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
A member of the ICP(G3) family of high-speed, production-grade in-circuit programmers. This compact, battery-powered device supports up to six different programming environments, making it an ideal, low-cost solution for field upgrades. ICP2PORT(G3) programs Microchip 8-bit PIC® & AVR® MCUs and Serial EEPROMs & Flash ICs. ICP2PORT(G3) hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Very fast programming
- 6 environments with counter
- Battery/USB/Adapter powered
- Convenient and easy-to-operate
Softlog is a trusted third-party tool provider.
A member of the ICP(G3) family of high-speed, production-grade in-circuit programmers. This compact, battery-powered device supports up to six different programming environments, making it an ideal, low-cost solution for field upgrades. ICP2PORT(G3) programs Microchip 8-bit PIC® & AVR® MCUs and Serial EEPROMs & Flash ICs. ICP2PORT(G3) hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Very fast programming
- 6 environments with counter
- Battery/USB/Adapter powered
- Convenient and easy-to-operate
Softlog is a trusted third-party tool provider.
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
ATARFID-EK2 is a LF evaluation kit based on a professional 3rd party programmer supporting the ATA5575 and ATA5577 RFID IDICs devices.
ATARFID-EK2 is a LF evaluation kit based on a professional 3rd party programmer supporting the ATA5575 and ATA5577 RFID IDICs devices.
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
A member of the ICP(G3) family of high-speed, production-grade in-circuit programmers. This compact, battery-powered device supports up to six different programming environments, making it an ideal, low-cost solution for field upgrades. ICP2PORT(G3)-P programs Microchip 8-bit PIC® & AVR® MCUs, 16-bit PIC MCUs & dsPIC® DSCs and Serial EEPROMs & Flash ICs. ICP2PORT(G3)-P hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Very fast programming
- 6 environments with counter
- Battery/USB/Adapter powered
- Convenient and east-to-operate
Softlog is a trusted third-party tool provider.
A member of the ICP(G3) family of high-speed, production-grade in-circuit programmers. This compact, battery-powered device supports up to six different programming environments, making it an ideal, low-cost solution for field upgrades. ICP2PORT(G3)-P programs Microchip 8-bit PIC® & AVR® MCUs, 16-bit PIC MCUs & dsPIC® DSCs and Serial EEPROMs & Flash ICs. ICP2PORT(G3)-P hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Very fast programming
- 6 environments with counter
- Battery/USB/Adapter powered
- Convenient and east-to-operate
Softlog is a trusted third-party tool provider.
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
A member of the ICP(G3) family of high-speed, production-grade in-circuit programmers. This compact, battery-powered device supports up to six different programming environments, making it an ideal, low-cost solution for field upgrades. ICP2PORT(G3)-PX programs Microchip 8-bit PIC® & AVR® MCUs, 16-bit PIC MCUs & dsPIC® DSCs, 32-bit PIC & ARM Cortex M0/0+/23/3/4/7 MCUs and Serial EEPROMs & Flash ICs. ICP2PORT(G3)-PX hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Very fast programming
- 6 environments with counter
- Battery/USB/Adapter powered
- Convenient and east-to-operate
Softlog is a trusted third-party tool provider.
A member of the ICP(G3) family of high-speed, production-grade in-circuit programmers. This compact, battery-powered device supports up to six different programming environments, making it an ideal, low-cost solution for field upgrades. ICP2PORT(G3)-PX programs Microchip 8-bit PIC® & AVR® MCUs, 16-bit PIC MCUs & dsPIC® DSCs, 32-bit PIC & ARM Cortex M0/0+/23/3/4/7 MCUs and Serial EEPROMs & Flash ICs. ICP2PORT(G3)-PX hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Very fast programming
- 6 environments with counter
- Battery/USB/Adapter powered
- Convenient and east-to-operate
Softlog is a trusted third-party tool provider.
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
The ICP2(G3) Production Quality In-Circuit Programmer is a cost-effective programmer that operates with a PC or as a standalone unit. It programs 8-bit PIC® & AVR® MCUs and Serial EEPROMs & Flash ICs. ICP2(G3) hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.).
Features:
- Very-fast programming
- 250mA Vdd drive current (per channel)
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX
Softlog is a trusted third-party tool provider.
The ICP2(G3) Production Quality In-Circuit Programmer is a cost-effective programmer that operates with a PC or as a standalone unit. It programs 8-bit PIC® & AVR® MCUs and Serial EEPROMs & Flash ICs. ICP2(G3) hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.).
Features:
- Very-fast programming
- 250mA Vdd drive current (per channel)
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX
Softlog is a trusted third-party tool provider.
Standard Pricing
Quantity
EUR per Unit
The SEC-DS Secure Programming Upgrade can be applied to any Softlog ICP2 programmer. It dramatically reduces the risk of unauthorized reconstruction of hex files, and also limits how many times the hex file can be programmed. The secure programming upgrade must be installed by a user with administrative (ADMIN) privileges, and internet access is required. Once installed, the programmer can be delivered to a contract manufacturer or other un-privileged user. Programming is then controlled by environment files created by the ADMIN with strong encryption.
Softlog is a trusted Third-Party Tool provider.
The SEC-DS Secure Programming Upgrade can be applied to any Softlog ICP2 programmer. It dramatically reduces the risk of unauthorized reconstruction of hex files, and also limits how many times the hex file can be programmed. The secure programming upgrade must be installed by a user with administrative (ADMIN) privileges, and internet access is required. Once installed, the programmer can be delivered to a contract manufacturer or other un-privileged user. Programming is then controlled by environment files created by the ADMIN with strong encryption.
Softlog is a trusted Third-Party Tool provider.
Standard Pricing
Quantity
EUR per Unit
Mature Product
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
Mature Product
It supports SPI, JTAG, PDI, and aWire programming modes and debugging using debugWIRE, JTAG, PDI, and aWire interfaces. AVR ONE! is driven by a powerful FPGA which provides high-speed data transfer between the host PC and the target AVR device, facilitating rapid program download and a most responsive debugging experience.
It supports SPI, JTAG, PDI, and aWire programming modes and debugging using debugWIRE, JTAG, PDI, and aWire interfaces. AVR ONE! is driven by a powerful FPGA which provides high-speed data transfer between the host PC and the target AVR device, facilitating rapid program download and a most responsive debugging experience.
Standard Pricing
Quantity
EUR per Unit
The ICP2(G3)-DP Production Quality In-Circuit Programmer is a cost-effective programmer that operates with a PC or as a standalone unit. It programs 8-bit PIC® & AVR® MCUs, 16-bit PIC MCUs & dsPIC® DSCs and Serial EEPROMs & Flash ICs. ICP2(G3)-DP hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Very fast programming
- 250mA Vdd drive current
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory for non-volatile storage of the HEX (2 environments)
- Windows® DLL functions and command-line interface for high-volume automatic programming
Softlog is a trusted third-party tool provider.
The ICP2(G3)-DP Production Quality In-Circuit Programmer is a cost-effective programmer that operates with a PC or as a standalone unit. It programs 8-bit PIC® & AVR® MCUs, 16-bit PIC MCUs & dsPIC® DSCs and Serial EEPROMs & Flash ICs. ICP2(G3)-DP hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Very fast programming
- 250mA Vdd drive current
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory for non-volatile storage of the HEX (2 environments)
- Windows® DLL functions and command-line interface for high-volume automatic programming
Softlog is a trusted third-party tool provider.
Standard Pricing
Quantity
EUR per Unit
The ICP2(G3)-DPX Production Quality In-Circuit Programmer is a cost-effective programmer that operates with a PC or as a standalone unit. It programs 8-bit PIC® & AVR® MCUs, 16-bit PIC MCUs & dsPIC® DSCs, 32-bit PIC & ARM Cortex M0/0+/23/3/4/7 MCUs and Serial EEPROMs & Flash ICs. ICP2(G3)-DPX hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Very-fast programming
- 250mA Vdd drive current
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX (2 environments)
- Windows® DLL functions and command-line interface for high-volume automatic programming
Softlog is a trusted third-party tool provider.
The ICP2(G3)-DPX Production Quality In-Circuit Programmer is a cost-effective programmer that operates with a PC or as a standalone unit. It programs 8-bit PIC® & AVR® MCUs, 16-bit PIC MCUs & dsPIC® DSCs, 32-bit PIC & ARM Cortex M0/0+/23/3/4/7 MCUs and Serial EEPROMs & Flash ICs. ICP2(G3)-DPX hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Very-fast programming
- 250mA Vdd drive current
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX (2 environments)
- Windows® DLL functions and command-line interface for high-volume automatic programming
Softlog is a trusted third-party tool provider.
Standard Pricing
Quantity
EUR per Unit
Softlog is a trusted Third Party Tool provider
Softlog is a trusted Third Party Tool provider
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
The ICP2GANG(G3) Production Quality In-Circuit 4-channel (expandable to 64 channels) GANG programmer is a cost-effective programmer that operates with a PC or as a standalone unit and simultaneously programs 8-bit PIC® & AVR® MCUs and serial EEPROMs & Flash ICs. ICP2GANG(G3) hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.
Features:
- Very-fast programming
- 250mA Vdd drive current (per channel)
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX (2 environments)
Softlog is a trusted third-party tool provider.
The ICP2GANG(G3) Production Quality In-Circuit 4-channel (expandable to 64 channels) GANG programmer is a cost-effective programmer that operates with a PC or as a standalone unit and simultaneously programs 8-bit PIC® & AVR® MCUs and serial EEPROMs & Flash ICs. ICP2GANG(G3) hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.
Features:
- Very-fast programming
- 250mA Vdd drive current (per channel)
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX (2 environments)
Softlog is a trusted third-party tool provider.
Standard Pricing
Quantity
EUR per Unit
Standard Pricing
Quantity
EUR per Unit
The latest version of CCS's Prime8 Production Programmer (SKU# 53504-830) is a low-cost way to program up to eight (8) devices concurrently. Prime8 operates in stand-alone mode or when connected to a PC. The unit will supply up to 200ma at 2-5V to power target devices. It can program all devices in the PIC10, PIC12, PIC14, PIC16, PIC17, PIC18, PIC24, dsPIC and PIC32 families. The newest features include flash-drive readability, faster programming speed, and a graphics display touchscreen menu with easy-to-read icons.
CCS is a trusted Third-Party Tool Provider.
The latest version of CCS's Prime8 Production Programmer (SKU# 53504-830) is a low-cost way to program up to eight (8) devices concurrently. Prime8 operates in stand-alone mode or when connected to a PC. The unit will supply up to 200ma at 2-5V to power target devices. It can program all devices in the PIC10, PIC12, PIC14, PIC16, PIC17, PIC18, PIC24, dsPIC and PIC32 families. The newest features include flash-drive readability, faster programming speed, and a graphics display touchscreen menu with easy-to-read icons.
CCS is a trusted Third-Party Tool Provider.
Standard Pricing
Quantity
EUR per Unit
The ICP2(G3)-DS Production Quality Secure Programmer is an in-circuit programmer that operates with a PC or as a standalone unit, and programs 8-bit PIC® & AVR® MCUs and serial EEPROMs & Flash ICs. The secure programming feature dramatically reduces the risk of unauthorized reconstruction of hex files, and also limits how many times the hex file can be programmed. ICP2(G3)-DS hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Very fast programming
- 250mA Vdd drive current
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory for non-volatile storage of the HEX (2 environments)
- Windows® DLL functions and command-line interface for high-volume automatic programming
Softlog is a trusted third-party tool provider.
The ICP2(G3)-DS Production Quality Secure Programmer is an in-circuit programmer that operates with a PC or as a standalone unit, and programs 8-bit PIC® & AVR® MCUs and serial EEPROMs & Flash ICs. The secure programming feature dramatically reduces the risk of unauthorized reconstruction of hex files, and also limits how many times the hex file can be programmed. ICP2(G3)-DS hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Very fast programming
- 250mA Vdd drive current
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory for non-volatile storage of the HEX (2 environments)
- Windows® DLL functions and command-line interface for high-volume automatic programming
Softlog is a trusted third-party tool provider.
Standard Pricing
Quantity
EUR per Unit
The ICP2GANG(G3)-DP Production Quality In-Circuit 4-channel (expandable to 64 channels) GANG programmer is a cost-effective programmer that operates with a PC or as a standalone unit and simultaneously programs 8-bit PIC® & AVR® MCUs, 16-bit PIC MCUs & dsPIC® DSCs, and serial EEPROMs & Flash ICs. ICP2GANG(G3)-DP hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Very fast programming
- 250mA Vdd drive current (per channel)
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX (2 environments)
- Windows® DLL functions and command-line interface for high-volume automatic programming
Softlog is a trusted third-party tool provider.
The ICP2GANG(G3)-DP Production Quality In-Circuit 4-channel (expandable to 64 channels) GANG programmer is a cost-effective programmer that operates with a PC or as a standalone unit and simultaneously programs 8-bit PIC® & AVR® MCUs, 16-bit PIC MCUs & dsPIC® DSCs, and serial EEPROMs & Flash ICs. ICP2GANG(G3)-DP hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Very fast programming
- 250mA Vdd drive current (per channel)
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX (2 environments)
- Windows® DLL functions and command-line interface for high-volume automatic programming
Softlog is a trusted third-party tool provider.
Standard Pricing
Quantity
EUR per Unit
The ICP2GANG(G3)-DPX Production Quality In-Circuit 4-channel (expandable to 64 channels) GANG programmer is a cost-effective programmer that operates with a PC or as a standalone unit and simultaneously programs 8-bit PIC® & AVR® MCUs, 16-bit PIC MCUs & dsPIC® DSCs, 32-bit PIC & ARM Cortex M0/0+/23/3/4/7 MCUs and Serial EEPROMs & Flash ICs. ICP2GANG(G3)-DPX hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Very-fast programming
- 250mA Vdd drive current (per channel)
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX (2 environments)
- Windows® DLL functions and command-line interface for high-volume automatic programming
Softlog is a trusted third-party tool provider.
The ICP2GANG(G3)-DPX Production Quality In-Circuit 4-channel (expandable to 64 channels) GANG programmer is a cost-effective programmer that operates with a PC or as a standalone unit and simultaneously programs 8-bit PIC® & AVR® MCUs, 16-bit PIC MCUs & dsPIC® DSCs, 32-bit PIC & ARM Cortex M0/0+/23/3/4/7 MCUs and Serial EEPROMs & Flash ICs. ICP2GANG(G3)-DPX hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Very-fast programming
- 250mA Vdd drive current (per channel)
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX (2 environments)
- Windows® DLL functions and command-line interface for high-volume automatic programming
Softlog is a trusted third-party tool provider.
Standard Pricing
Quantity
EUR per Unit
The ICP2GANG(G3)-DS Production Quality ICSP Secure GANG Programmer is a 4-channel in-circuit programmer (expandable up to 64 channels) that operates with a PC or as a standalone unit and simultaneously programs 8-bit PIC® & AVR® MCUs and serial EEPROMs & Flash ICs. The secure programming feature dramatically reduces the risk of unauthorized reconstruction of hex files, and also limits how many times the hex file can be programmed. ICP2GANG(G3)-DS hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Very fast programming
- 250mA Vdd drive current (per channel)
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX (2 environments)
- Windows® DLL functions and command-line interface for high-volume automatic programming
Softlog is a trusted third-party tool provider.
The ICP2GANG(G3)-DS Production Quality ICSP Secure GANG Programmer is a 4-channel in-circuit programmer (expandable up to 64 channels) that operates with a PC or as a standalone unit and simultaneously programs 8-bit PIC® & AVR® MCUs and serial EEPROMs & Flash ICs. The secure programming feature dramatically reduces the risk of unauthorized reconstruction of hex files, and also limits how many times the hex file can be programmed. ICP2GANG(G3)-DS hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Very fast programming
- 250mA Vdd drive current (per channel)
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX (2 environments)
- Windows® DLL functions and command-line interface for high-volume automatic programming
Softlog is a trusted third-party tool provider.
Standard Pricing
Quantity
EUR per Unit
The ICP2COMBO(G3)-8 Production Quality In-Circuit (ICSP) 8-channel (expandable up to 64 channels) GANG Programmer is a cost-effective programmer that operates with a PC or as a standalone unit and simultaneously programs 8-bit PIC® & AVR® MCUs and serial EEPROMs & Flash ICs. ICP2COMBO(G3)-8 hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Ultra-fast programming
- Built-in opto-relay barrier for target lines
- Galvanic isolation of control lines
- 250mA Vdd drive current (per channel)
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX (6 environments)
Softlog is a trusted third-party tool provider.
The ICP2COMBO(G3)-8 Production Quality In-Circuit (ICSP) 8-channel (expandable up to 64 channels) GANG Programmer is a cost-effective programmer that operates with a PC or as a standalone unit and simultaneously programs 8-bit PIC® & AVR® MCUs and serial EEPROMs & Flash ICs. ICP2COMBO(G3)-8 hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Ultra-fast programming
- Built-in opto-relay barrier for target lines
- Galvanic isolation of control lines
- 250mA Vdd drive current (per channel)
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX (6 environments)
Softlog is a trusted third-party tool provider.
Standard Pricing
Quantity
EUR per Unit
The ICP2COMBO(G3)-12 Production Quality In-Circuit (ICSP) 12-channel (expandable up to 60 channels) GANG Programmer is a cost-effective programmer that operates with a PC or as a standalone unit and simultaneously programs 8-bit PIC® & AVR® MCUs and serial EEPROMs & Flash ICs. ICP2COMBO(G3)-12 hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Ultra-fast programming
- Built-in opto-relay barrier for target lines
- Galvanic isolation of control lines
- 250mA Vdd drive current (per channel)
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX (6 environments)
Softlog is a trusted third-party tool provider.
The ICP2COMBO(G3)-12 Production Quality In-Circuit (ICSP) 12-channel (expandable up to 60 channels) GANG Programmer is a cost-effective programmer that operates with a PC or as a standalone unit and simultaneously programs 8-bit PIC® & AVR® MCUs and serial EEPROMs & Flash ICs. ICP2COMBO(G3)-12 hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Ultra-fast programming
- Built-in opto-relay barrier for target lines
- Galvanic isolation of control lines
- 250mA Vdd drive current (per channel)
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX (6 environments)
Softlog is a trusted third-party tool provider.
Standard Pricing
Quantity
EUR per Unit
The ICP2COMBO(G3)-DPX-8 Production Quality In-Circuit (ICSP) 8-channel (expandable up to 64 channels) GANG Programmer is a cost-effective programmer that operates with a PC or as a standalone unit and simultaneously programs 8-bit PIC® & AVR® MCUs, 16-bit PIC MCUs & dsPIC® DSCs, 32-bit PIC & ARM Cortex M0/0+/23/3/4/7 MCUs and Serial EEPROMs & Flash ICs. ICP2COMBO(G3)-DPX-8 hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Ultra-fast programming
- Built-in opto-relay barrier for target lines
- Galvanic isolation of control lines
- 250mA Vdd drive current (per channel)
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX (6 environments)
- Windows® DLL functions and command-line interface for high-volume automatic programming
Softlog is a trusted third-party tool provider.
The ICP2COMBO(G3)-DPX-8 Production Quality In-Circuit (ICSP) 8-channel (expandable up to 64 channels) GANG Programmer is a cost-effective programmer that operates with a PC or as a standalone unit and simultaneously programs 8-bit PIC® & AVR® MCUs, 16-bit PIC MCUs & dsPIC® DSCs, 32-bit PIC & ARM Cortex M0/0+/23/3/4/7 MCUs and Serial EEPROMs & Flash ICs. ICP2COMBO(G3)-DPX-8 hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Ultra-fast programming
- Built-in opto-relay barrier for target lines
- Galvanic isolation of control lines
- 250mA Vdd drive current (per channel)
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX (6 environments)
- Windows® DLL functions and command-line interface for high-volume automatic programming
Softlog is a trusted third-party tool provider.
Standard Pricing
Quantity
EUR per Unit
The ICP2COMBO(G3)-DPX-12 Production Quality In-Circuit (ICSP) 12-channel (expandable up to 60 channels) GANG Programmer is a cost-effective programmer that operates with a PC or as a standalone unit and simultaneously programs 8-bit PIC® & AVR® MCUs, 16-bit PIC MCUs & dsPIC® DSCs, 32-bit PIC & ARM Cortex M0/0+/23/3/4/7 MCUs and Serial EEPROMs & Flash ICs. ICP2COMBO(G3)-DPX-12 hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Ultra-fast programming
- Built-in opto-relay barrier for target lines
- Galvanic isolation of control lines
- 250mA Vdd drive current (per channel)
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX (6 environments)
- Windows® DLL functions and command-line interface for high-volume automatic programming
Softlog is a trusted third-party tool provider.
The ICP2COMBO(G3)-DPX-12 Production Quality In-Circuit (ICSP) 12-channel (expandable up to 60 channels) GANG Programmer is a cost-effective programmer that operates with a PC or as a standalone unit and simultaneously programs 8-bit PIC® & AVR® MCUs, 16-bit PIC MCUs & dsPIC® DSCs, 32-bit PIC & ARM Cortex M0/0+/23/3/4/7 MCUs and Serial EEPROMs & Flash ICs. ICP2COMBO(G3)-DPX-12 hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)
Features:
- Ultra-fast programming
- Built-in opto-relay barrier for target lines
- Galvanic isolation of control lines
- 250mA Vdd drive current (per channel)
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable clock/data speed (500KHz to 10MHz)
- On-board 32MByte flash memory per channel for non-volatile storage of the HEX (6 environments)
- Windows® DLL functions and command-line interface for high-volume automatic programming
Softlog is a trusted third-party tool provider.
Standard Pricing
Quantity
EUR per Unit
